PL EN
Research of toothed belt transmission with arched teeth
Oleg Krol 1  
,   Volodymyr Sokolov 1  
 
Więcej
Ukryj
1
Volodymyr Dahl East Ukrainian National University
AUTOR DO KORESPONDENCJI
Oleg Krol   

Volodymyr Dahl East Ukrainian National University
Data nadesłania: 09-07-2020
Data ostatniej rewizji: 28-10-2020
Data akceptacji: 02-11-2020
Data publikacji online: 09-11-2020
Data publikacji: 09-11-2020
 
Diagnostyka 2020;21(4):15–22
 
SŁOWA KLUCZOWE
DZIEDZINY
STRESZCZENIE
The presented work is devoted to the search for a new design of the toothed belt transmission for the drive of metal-cutting machines. The main constructive solution underlying the modernization of the existing transmission is associated with a change in the shape of the toothed belt teeth pulley in order to increase durability. The authors propose to consider the effectiveness of the design decisions made through the prism of increasing the load capacity of the toothed belt associated with an increase in the contact length of the arched shape teeth and the reduction of additional friction losses of the belt flanks along the flanges at the pulleys end surfaces designed to restrain the belt from transverse sliding from the pulleys. The authors conclude that a comparative analysis of typical and modernized structures must be based on the postulates of contact areas belt and pulley equality and the belt cross-sectional areas. The procedure of three-dimensional modeling of elements and assemblies of a toothed belt drive for a drill-milling-boring machine type is considered as a basis for a comprehensive further study of their effectiveness and efficiency.
 
REFERENCJE (32)
1.
Kotliar A, Basova Y, Ivanov V, Murzabulatova O, Vasyltsova S, Litvynenko M, Zinchenko O. Ensuring the economic efficiency of enterprises by multi-criteria selection of the optimal manufacturing process. Management and production engineering review. 2020; 11(1):52-61. http://dx.doi.org/10.24425/mpe....
 
2.
Zamriy AA. Practical training course CAD/CAE APM WinMachine. Teaching aid. Moscow: APM Publishing house. 2007. Russian.
 
3.
Shelofast VV. Fundamentals of machine design. Moscow: APM Publishing house, 2005. Russian.
 
4.
Krol O, Sokolov V. Parametric Modeling of Gear Cutting Tools. In: Gapiński B., Szostak M., Ivanov V. (eds) Advances in Manufacturing II. Manufacturing. 2019. Lecture Notes in Mechanical Engineering. Springer, Cham 2019; 4: 3-11. https://doi.org/10.1007/978-3-....
 
5.
Dobrotvorskiy S, Basova Y, Dobrovolska L, Sokol Y, Kazantsev N. Big Challenges of Small Manufacturing Enterprises in Industry 4.0. In: Ivanov V. et al. (eds) Advances in Design, Simulation and Manufacturing III. DSMIE 2020. Lecture Notes in Mechanical Engineering. Springer, Cham 2020; 1: 118-127. https://doi.org/10.1007/978-3-....
 
6.
Krol O, Sokolov V. Parametric Modeling of Transverse Layout for Machine Tool Gearboxes. In: Gapiński B., Szostak M., Ivanov V. (eds) Advances in Manufacturing II. Manufacturing. 2019. Lecture Notes in Mechanical Engineering. Springer, Cham 2019; 4: 122-130. https://doi.org/10.1007/978-3-....
 
7.
Ivanov V, Dehtiarov I, Pavlenko I, Liaposhchenko O, Zaloga V. Parametric optimization of fixtures for multiaxis machining of parts. In: Hamrol A., Kujawińska A., Barraza M. (eds) Advances in Manufacturing II. Manufacturing. 2019. Lecture Notes in Mechanical Engineering. Springer, Cham 2019; 2: 335-347. https://doi.org/10.1007/978-3-....
 
8.
Karpus VE, Ivanov VA. Locating accuracy of shafts in V-blocks. Russian Engineering Research 2012; 32(2):144-150. https://doi.org/10.3103/S10687....
 
9.
Patent of US 21337485, cl. 73-229. 21.07.1977.
 
10.
Błażej B, Jurdziak L, Kirjanow A, Kozłowski T. A device for measuring conveyor belt thickness and for evaluating the changes in belt transverse and longitudinal profile. Diagnostyka. 2017;18(4):97-102.
 
11.
Gładysiewicz L, Kawalec W, Krol R. Selection of carry idlers spacing of belt conveyor taking into account random stream of transported bulk material. Eksploatacja i Niezawodnosc – Maintenance and Reliability. 2016;18(1):32–37. http://dx.doi.org/10.17531/ein....
 
12.
Stojanović B., Miloradović N., Marjanović N., Blagojević M., Ivanović L. Length Variation of Toothed Belt During Exploitation. Strojniški vestnik. Journal of Mechanical Engineering 2011; 57(9): 648-654. https://doi.org/10.5545/sv-jme....
 
13.
Avramova TM, Bushuev VV, Gilova LY. Handbook on metal-cutting machine tools. Moscow: Mechanical Engineering, 2012. Russian.
 
14.
Sokolov V, Krol O, Stepanova O. Choice of Correcting Link for Electrohydraulic Servo Drive of Technological Equipment. In: Ivanov V. et al. (eds) Advances in Design, Simulation and Manufacturing II. DSMIE 2019. Lecture Notes in Mechanical Engineering. Springer, Cham. 2020; 702–710. https://doi.org/10.1007/978-3-....
 
15.
Krol O, Sokolov V. 3D modelling of angular spindle’s head for machining centre. J. Phys.: Conf. Ser. VSPID-2018. 2019; 1278: 012002. https://doi.org/10.1088/1742-6....
 
16.
Ganin N. Three dimensional modelling in KOMPAS-3D. Moscow: DMK Publishing house, 2012. Russian.
 
17.
Fomin E.P. Using the parametric capabilities of KOMPAS-3D. CAD and graphics. 2007; 10: 70-74.
 
18.
Sokolov V, Krol O, Stepanova O. Nonlinear simulation of electrohydraulic technological equipment/ J. Physics: Conf. Series. VSPID-2018 2019; 1278: 012003. https://doi.org/10.1088/1742-6....
 
19.
Kamnev A. C3D labs represent the C3D Toolkit. Topical technologies for developers of engineering software. Isicad 2017; 154: 12-18.
 
20.
Pritykin FN, Shmulenkova EE. The main elements of CAD metal-cutting tools when using parametric 3D modelling. Omsk Scientific Herald 2012; 1(107): 278-282. Russian.
 
21.
Yakovenko I, Permyakov A, Prihodko O, Basova Y, Ivanova M. Structural optimization of technological layout of modular machine tools. In Tonkonogyi V. et al. (eds). Advanced Manufacturing Processes. InterPartner-2019. Lecture Notes in Mechanical Engineering. Springer. 2020; 352–363. https://doi.org/10.1007/978-3-....
 
22.
Ivanov V. Process-oriented approach to fixture design. In Ivanov V. et al. (eds) Advances in Design, Simulation and Manufacturing. DSMIE-2018. Lecture Notes in Mechanical Engineering. Springer. Cham 2019; 42–50. https://doi.org/10.1007/978-3-....
 
23.
Yakovenko I, Permyakov A, Naboka O, Prihodko O, Havryliuk Y. Parametric Optimization of Technological Layout of Modular Machine Tools. In: Ivanov V. et al. (eds) Advances in Design, Simulation and Manufacturing III. DSMIE 2020. Lecture Notes in Mechanical Engineering. Springer, Cham. 2020; 1: 85-93. https://doi.org/10.1007/978-3-....
 
24.
Magomedov A, Alechin A. Integrated finite element analysis in KOMPAS-3D. CAD/CAM/CAE observer 2010; 8(60): 1-5.
 
25.
Girschtick J. Introducing parametric modelling 2.0. Isicad 2018; 162: 8-14.
 
26.
Shelofast VV, Chugunova TB. Fundamentals of machine design. Examples of problem-solving. Moscow: APM Publishing house, 2004. Russian.
 
27.
Rozinsky S, Shanin D, Grigoriev S. Parametric capabilities of the graphic module APM Graph of the APM WinMachine system. CAD and graphics 2001; 11: 17-40.
 
28.
Kondrashova SG, Khamidulina DA, Lashkov VA. Engineering design of mechanisms using the APM WinMachine system. Bulletin of Kazan Technological University 2011; 19: 193-198. Russian.
 
29.
Nikolaev A, Sokol I. Module APM Base – effective work with databases. CAD and graphics 2005; 1: 42-49.
 
30.
Sokol I, Savchenko Y, Shanin D, Rosinsky S. Data Base “APM Data” – connecting element in structure APM WinMachine. CAD and graphics 2002; 9: 9-12.
 
31.
OST 38 05114-76. Toothed belt transmissions. Calculation Methods.
 
32.
Shevchenko SV, Mukhovaty OA, Krol OS. Toothed belt transmission. Patent of Ukraine 2015; 100880.
 
eISSN:2449-5220
ISSN:1641-6414